Sanipump ZFS 71
Cast iron submersible pump :
Total Head 39m
Suitable for removing...
-
Whether you want to install a new bathroom, additional toilets, a laundry room or connect a condensate pump, SFA has the solution that meets your needs. With minimum work you can simply drain and pump all the water away.
-
For a boiler, an air conditioner, a shower, a toilet, a kitchen, a laundry room, a refrigerated display case, a house or even a complete building, SFA has been the specialist in lifting all water since 1958 whether you are a DIY enthusiast or a professional, we have the solution that meets your needs.
-
If you have a question, want to activate your warranty or need to find an Engineer we are here to help!
-
As the historical inventor of the Saniflo macerator, SFA has forged their expertise over time. Discover the history and values of the SFA group.
-
To ensure you have the most suitable solution, SFA offers you single-phase or three-phase power solutions, grey water, black water or even rainwater or even rainwater.
Filter by
Sanipump ZPG 71
Cast iron submersible pump :
Drainage and Storm Water Pumping
Can be...
Sanipump
A submersive sump pump with macerator blades or Vortex version for use in...
Sanipump SLD 700
Sanipump SLD 700 is a lift pump dedicated to high-flow rainwater.
High flow...
Sanipump VX 50
Sanipump VX 50 is a submersible pump for lifting wastewater and rainwater to a...
Sanipump VX 65/80
Sanipump VX 65/80 are cast iron submersible pumps designed for the lifting of...
Why install Submersible pumps?
SFA offers a complete range of pumps for lifting stations called Sanipump. In grinder or Vortex version, with a single-phase or three-phase motor, the range covers all the needs for lifting grey water, black water and rainwater. Installation of these pumps can be in dedicated SFA stations - our Sanifos range, or using existing storage tanks or concrete pits.
Sanipump GR is equipped with a Pro X K2 macerating system. It discharges water in a small diameter (add pipework).
Sanipump GR and VX are compact and lightweight portable pumps (only 13 kg) for domestic wastewater such as WC, bathroom, kitchen or laundry room, accepting water up to 70 °C (5 minutes maximum).
The Sanipump lifting station pump is available in two versions:
Sanipump GR is equipped with a Pro X K2 knife maceration system. It discharges water in a small diameter (DN 40), up to 14 m in height with a flow rate of up to 11 m³ / h.
Sanipump VX is equipped with a Vortex impeller, it evacuates wastewater through a 50 mm diameter pipework and lifts up to 13 m in height with a flow rate of up to 27 m³ / h.
Sanipump ZPG 71 is a submersible cast iron pump for pumping grey water (drainage water and storm water in S1 mode), with a maximum lifting height of 31 m and a free passage of 40 mm.
Sanipump ZPG 71 is a pump for a lifting station, but can also be installed in a manhole or a pit.
All accessories are available for installation on the floor or on a base.
Sanipump ZPG 71 is compatible with the Sanifos 1600/2100/3100 and is available in 4 versions (1 single-phase and 3 three-phase).
Sanipump ZFS 71 is a submersible cast iron pump for pumping wastewater (collective sanitary facilities or establishments open to the public) with a high manometric head of 39 m. This pump is compatible with the Sanifos 1600, 2100 and 3100 lifting stations. It is equipped with a high-performance grinding system and a double mechanical seal, it is available in 5 versions, single-phase and three-phase, with a lifting height of up to 39 m depending on the model.
All accessories are available for installation on the floor or on a base.
Sanipump SLD is a pump to be used in pumping station and is dedicated to rainwater (48 m3 / h). It has a two-channel impeller with a free passage of 50 mm.
Sanipump SLD is available in 3 models, single-phase or three-phase:
Sanipump SLD 700 S: single-phase pump
Sanipump SLD 700 SA: single-phase pump with float switch
Sanipump SLD 700 T: three-phase pump
SFA offers you a tailor-made offer with the choice of components according to your needs.
Available in a version without a seat base for easy installation or on guide bars with a coupling system.
Accessory kits are available to provide an answer to all your needs, whether for a single or twin-pump installation.
When 2 pumps are installed, it is recommended to install a ZPS control box and Aqua XL floats.
All these pumps are guaranteed for 2 years.