WhoshouldIsee Tracks
Sanisub 800 Rainkit

Sanisub 800 Rainkit

The Sanisub 800 Rainkit is a submersible kit designed for pumping flood water from basements or ground floor car parks:

  • Particle size of 20mm without the drain by placing the pumps on the feet provided
  • Lift height of 11m
  • 2 x Sanisub 800 pumps
  • Alternating operation of the pumps
  • Control box supplied
  • Non-return valves integrated into the pumps
  • Stainless steel frame with overflow filling
  • Pre-assembled pipes
£0.00

The Sanisub 800 Rainkit is a submersible pumping kit for clear water. It can pump flood water from basements or ground floor car parks. This pump kit can raise water up to 11m with a particle size of 20mm without the drain by placing the pumps on the feet provided. This rainwater lifting kit consists of 2 pumps to be mounted on a stainless...

See more

Technical data sheet

Column 0
Electrical class I
Type of activation Float
Materials
Pump body PP GF, PP GF
Shaft Stainless steel
Waterproofing NBR
Electrical characteristics
Voltage 230 V
Frequency 50-60 Hz
Power consumption P1 800 W
Power output P2 600 W
RPM 2800 rpm
Immersion depth 7 m
Power cable: Length 10 m
Hydraulics
Max. flow rate 15 m³/h
Ext. discharge diameter 40 mm
Discharge diameter G 1"1/4 inch
ON/OFF level 250/130
Particle size 20 mm
Max. permissible temperature of the pumped liquid 70°C (5 mins)
Wheel type Multi-channel wheel
Max. Head (m) 11
Identification & Logistics
Gross weight 24